constructor – Specialised Build

Interior plastering and plasterboard, Coin, nr Marbella

Interior plastering and plasterboard, Coin, nr Marbella.

This beautiful country house is in the hills above Marbella on the way to Coin. In this post, you can see the progress that our building team has made on the interior of the property. The house was very old and had constantly had new parts added and so none of the rooms had straight walls or ceilings of the same height.

In this part, which will be the lounge, we have removed columns, chimneys, false ceilings and stone cladding. We have then installed the plasterboard on all walls and ceiling. This will mean that where there were 2 rooms with several different finishes and different ceiling heights, there is now one type of wall and one level of ceiling.

There is a cavity between the plasterboard and the original walls, so this will give added insulation.

All the floors will have the same slate grey tiles throughout.

In the adjoining room, we have started to strip out the ceiling and this will get the same treatment.

Removing false ceilings, campo house, Marbella

Coin, Costa del Sol Builders

Interior plasterboarding, Marbella

Renovation of villa, Marbella

Coin, Malaga, Building company

Building services, Costa del Sol

Plaster board, interior, Marbella

Total villa renovation

We have also installed all new windows, with double glazing and persiana shutters and completely rewired the entire house. The finishing touch will be a new cast iron wood burning stove

Uncategorized

Fibre glass swimming pool lining and waterproofing, Malaga, Costa del Sol

We line swimming pools with gelcoat and fibreglass in most areas of the Costa del Sol, Nerja, Velez-Malaga, Torremolinos, Fuengirola, Mijas, Marbella, Estepona etc and inland areas such as Coin and Alhaurin.

The fibre glass lining of a swimming pool is a fairly quick process, resulting in a fully waterproof pool structure that will give a modern clean look, whilst being easy to maintain.

Fibreglass or polyester lining is more economical than other finishes.

The polyester is a long lasting, hard wearing surface, reducing the build up of cal and algae due to its water repellent properties. The polyester is 100% waterproof and has a certain amount of flex, making it a good product for waterproofing structurally flawed pools. It can either be left as the finished surface, or be treated to allow tiling.

It can be applied directly over painted, tiled or other finishes, as long as the substrate is reasonably smooth.

It is not necessary to change any of the fittings in the pool, thus reducing cost.

Preparation of the surfaces. The pool needs to be clean and dry when the team arrives on site. The products can not be applied over damp surfaces.

Tiled Pools – If the grout is reasonably good, the polyester can be applied directly over the existing tiles. If the grout is in very poor condition, or missing, it will need skimming with 52.2 cement.

Painted Pools – Any loose or flaking paint needs to be removed. In areas where the paint is very thick and uneven, this will need to be ground smooth.

If the pool has very square corners, these should be rounded with a sand cement mix, as it is very hard to fold the matting into the corners. This can be seen in the link below.

Application of the product.

We apply 450gms/m2 of chopped fibre matting. Approximately 1kg/m2 tixotropic resin and finish with high paraffin content gelcoat, in white. Fittings are masked.

It is possible to tile over the fibreglass (if the pool is of concrete or block construction), either immediately, or in the future as budget allows. In order to apply tiles, the final layer of gelcoat is treated to provide a bond for the tile adhesives.
Once the resins have set, the masking can be removed and the edges sealed with polyurethane.

After this, the pool needs about 3 or 4 days to dry before filling up.

We recommend that the finish is in white, as it is the most hard wearing.

Swimming pool, fibreglass lined Fuengirola, Malaga

Waterproofing using fibreglass. Polyester resin and glass fibre matt

Fibre Glass finished swimming pool. Pool structure leaking

Lining and waterproofing using fibreglass in Malaga

Lining and waterproofing using fibreglass and polyester resin in Malaga

Refinishing a pool in an atico, Marbella

Refinishing a pool in an atico penthouse, Marbella

Penthouse swimming pool renovation, Marbella

start of swimming pool construction in Estepona

Swimming Pools

Swimming pool construction and renovation, Costa del Sol

We have vast experience in the renovation and construction of swimming pools.

For new swimming pool constructions, the most time consuming thing is the paperwork. The actual construction of a concrete swimming pool takes us about 2 weeks.

The first step in the construction of the swimming pool is to retain an architect. The architect will draw up plans and submit these for approval. Once the plans have been stamped, we can move on to applying for the building license. This can take any where from a few weeks to 12 months, depending on the area.

When the paperwork is completed and approved we can break ground. We favour sprayed gunite concrete for small domestic pools. The pool form is excavated to the required dimensions, and brick shuttering is built. Once this is in place, steel reinforcing is put into place, along with the pipes and light buckets.

The concrete is then sprayed at the wall under high pressure to a depth of around 200mm

After this we cast the white marmolina swimming pool surround, render the walls and tile with glass mosaic gresite.

Exterior , Interior

Complete Villa Renovation in Coin, nr Marbella, Costa del Sol

The joy of purchasing a home on the Costa del Sol, is that you are able to put your stamp on it and make it truly personal. Renovating or reforming an existing finca or villa is a way of doing just that. It allows yo to get the finish that you want from your swimming pool area, terrace and interior living spaces.

Planning the schedule of works is the first step. We will not only discuss your immediate plans, but also your future plans to ensure that no unnecessary works are done and that no extra cost is incurred in the long term.

Part of our service can include the application for the correct licenses from the town hall (ayuntamiento), whether it be small works (obra menor) or major project (obra mayor). In general, for an obra mayor an architects project is required.

Our team of specialists includes architects, plumbers, certified electricians, tilers, painters.. we have it covered.

In this example, the project was of a huge scale, taking just under 6 months to complete. The entire home was stripped out down to bare walls and floors and then started again. This included all the electrics and plumbing. The villa was completely rewired and supplied with a new Boletin (safety certificate required by the energy company). Some of the plumbing was not good as new pipes had been added, others blocked off etc.. so leaks would probably be a problem in the future.

Each room was completely stripped out, rendered and plastered, then new high quality tiled floors put down. New windows and doors were installed.

Here are some progress photos, in later posts, we will post finished pictures and detailed descriptions of the building work involved.

Progress with interior renovation of villa

Exterior , Interior , Swimming Pools

Villa renovation Fuengirola

This is the first stages of a complete villa renovation in Fuengirola. The villa will undergo a complete reform, but the work will be carried out in stages to ease the financial burden of the project and to give the clients relief from the building works (as the clients have moved into the villa now it is habitable).

The first part of the renovation was carried out last year, renovating the interior, kitchen, bathroom, and living areas. This was all plastered and painted and is a comfortable living space.

The second part of the renovation was what can be seen here. The pool was leaking, so has been renovated using a Renolit AlkorPlan 3000 reinforced pool membrane which completely seals the structure, with a 10 year warranty. In addition some minor leaks were repaired in the pump room.

We have carried out some exterior painting with fine detail on the balustrade and replaced some doors and windows.

In the pictures you can see that work has started on the underbuild, The basement area will be made into a self contained apartment.

We can be flexible and work to our clients needs and budget.

Exterior , Interior

Electrician Costa del Sol

We have qualified electricians on hand that can rewire villas and apartments and provide the all important “boletin”, to be able to get electrical connection.

If major renovation works are done on an older property, it makes little sense to leave old cable under new finishes.

As part of the rewiring, plug sockets, lights and light switches can all be put in more convenient places. Cables and conduits can be run for existing installations and also allow for future upgrades such as air conditioning units, pool heaters, exterior lighting, automated gates. Part of our approach to building works is to think about future requirements as well, this often saves money in the long run.

Exterior , Swimming Pools

Pool transformation, pool made bigger, pool tiled and leaks repaired

We completely renovated this old leaking swimming pool. The first thing we did was diagnose the source of the leaks. We diagnosed leaks in 2 runs of plumbing, in both the skimmer pipes and the return pipe.

The bridge, which didn’t really have a purpose was removed so we could make the pool wider, as at this point it was very narrow. The pool looked even narrower once the bridge was removed. It is not normally recommended to alter the structure of a pool, but in this case it was feasible, as we were working on the shallow end of the pool, where there was less stresses involved.

Steps were built into the shallow end of the pool that also serve as a seating area, perfect for enjoying the panoramic views from this villa in Mijas.

Once the pool had been made wider and the steps had been built in, we cast a new “marmolina” pool surround. The marmolina is white concrete that is floated to give a uniform smooth surface, but still is non slip. To make the marmolina we have to build shuttering around the pool and pour the mix into it. After the shuttering comes off, we polish the edges and put expansion cuts in it.

After this the swimming pool can be tiled, grouted and cleaned ready for filling.

The plumbing is all new, for a trouble free future. When planning works to the pool, it is important to consider the future.

After all this work, the transformation was complete with a tropical turquoise tile and a beautiful new surround. This was quite an amazing transformation, taking our superb team about 2 weeks. For perspective, the pool measures 15m x 5m

Pool building and renovation works, Mijas

Complete building service, Costa del Sol

Leaking swimming pool in need of reform, Mijas

Making the swimming pool wider, Mijas

Swimming pool construction

Interior

Kitchen design and installation for country villa, Coin, Malaga

Kitchen design and installation for country villa, Coin, Malaga. Coin is a large inland town, about a 30 minute drive from both Marbella and Fuengirola.

As the kitchen is probably the most important room in the house, it needs to be carefully planned to ensure that the area flows smoothly. Our designers provide plans and 3D designs.

In this example, we completely stripped the room to a bare shell. All the old tiles were removed, along with all the old plumbing and electrics.

The client chose white cabinets with concealed handles and a stunning grey silistone top which glitters in the light from the shiny silver accents.

The walls of the kitchen have been left painted, which allows a quick colour change in the future, for this reason we specified that the upright of the kitchen work surface was slightly taller than usual.

The kitchen has been specified with dual ovens and all new matching equipment.

All the electrics in the kitchen are new, which has allowed us to put plug sockets and switches in more suitable places, as the hob and extractor unit have moved to the centre island. The dual ovens needed an uprated supply and the fridge has moved to a new location. The sink is in more or less the same place as the in the original kitchen, but has all new water supply and an undersink water heater.

As part of this project, the floor was stripped out and then tiled using a dark grey non slip tile. This tile will continue throughout the house, giving a modern feel to the villa.

This kitchen installation is part of a much larger villa renovation project, which has involved stripping most of the villa to a shell. On our facebook page we have a complete gallery of the building works that have been carried out.